Estimated Arrival: Between May 17 and May 25. UK
Shipping & Returns: Free Shipping & Returns
Z6 ELECTRIC BIKE 21-SPEED ULTIMATE EDITION ELECTRIC MOUNTAIN BIKE 26"
Say Hello To Your New Ride
Brand new version with LCD control panel and new waterproof wiring.
With the Zipper Z6 electric bikes you get the best of both worlds. A fully capable mountain bike with Shimano 21 speed gearbox, large 26 inch wheels and off road adjustable suspension, plus a convenient electric bike for commuting and general transport that looks fantastic. During the week take advantage of the electric power system to nip around at a fraction of the cost of a car or motorbike and then at the weekend hit the trail for some off road fun. Features include 18 inch aluminium frame, lockable 36V 9AH lithium battery, powerful 250W brushless motor and digital LCD control panel that allows you to configure the e-bike plus gives all bike and trip information including remaining battery life. The electric MTB has walk assist with finger throttle, a kick stand, bright front and rear LED lights and a rust resistant chain.
QUICK RELASE SEATPOST
Spring loaded for added comfort and smooth ride
QUICK RELEASE FRONT WHEEL
Minimising space for storage or transit, and for ease of road side repairs
REMOVABLE 36V 9AH LITHIUM BATTERY
Gives longer life than the standard 8AH models on the market. Locks in place with key for security.
Rear mounted powerful 250W brushless motor.
Walk assist thumb throttle will push the bike up to 6km/h without peddling.
LCD CONTROL PANEL
From the control panel you can setup the bike the way you want it easily. It also gives full bike and trip information including remaining battery life and speed.
WAVY BRAKE DISCS
Wavy drilled front and rear brake discs, with front anodized aluminium red hub
Preload & lockouton front suspension
LARGE 26" WHEELS
With off road ready tyres
Rear mounted kickstand for easy parking
Classic Style Fenders
ALUMINIUM ALLOY FRAME
Making it lightweight yet durable
SHIMANO GEAR SYSTEM
21-speed Shimano gears and derailleur
- Full Online Spare Parts Backup
As with all bicycles, a Zipper e-bike must be used and maintained properly in order to function correctly. Please read the instruction manual carefully before attempting to assemble and use the bike, as it contains vital safety information to ensure the continued performance.
SKU ZIPPER-Z6B Manufacturer Zipper Bikes Engine / Motor Size 250W Deck Material Aluminium Fuel Type Electric Fuel Consumption No Fuel Tank Capacity No Max. Range Around 40km depending on weight and motor use. Battery 36V 9AH Lithium Charge Time 6-8hrs Max. Speed 25KM/H Max. Power (Kw/Rpm) No Max. Torque (N.M/Rpm) No Front Brakes Front disc brake (160mm disc) Rear Brakes Rear disc brake (160mm disc) Front Suspension Aluminum suspension fork. Suspension is lockable and adjustable. 100mm travel. Rear Suspension No Front Tyres 26 Inch Rear Tyres 26 Inch Starting System No Ignition No Transmission 21 Speed Shimano gearbox Wheel Base 1600mm Seat Height 815mm Ground Clearance of Pedals: 140mm Net Weight 25.5kgs Engine Type No Engine Bore x Stroke No Compression Ration No Drive Train No Recommended Age 14+ Years if used without supervision & 120kg max load Licence Requirements Zipper e-bikes meet the 'Electrically Assisted Pedal Cycles' (EAPCs) requirements and are therefore classed as normal pedal bikes. This means you can ride it on roads, cycle paths and anywhere else pedal bikes are allowed without a license or tax. Packing Info Around 30 minutes minor assembly required. Download instructions for more information. Extra Info. Electric bike may arrive with slight blemishes or minor scratches from transit. We cannot replace bikes for this reason. Please be aware of this before purchase. Download Instructions Brake Adjustment Guide Z6 Manual
UK - Free delivery - 3/7 working days
Thank you for purchasing the Zipper Z6 Power Assisted Electric Bicycle (EPAC). The Zipper Z6 features the most recent innovation in technology and applies to the ISO 4210-2 standard. Your new Zipper e-bike is made with a strong aluminium alloy frame, making it light yet durable, and comes with a lithium battery pre-installed, which has a range of up to 40km on a single charge. The Z4 was designed for off road cycling, built to handle loose terrain with inner city commuting also in mind.
The electric motor in your bike will assist you when pedalling to make cycling easier. You can adjust the level of assistance using the assistance level switch on the handlebars with level 1 giving minimal assistance and level 3 giving maximum assistance. The motor will only assist up to a maximum speed of 15.5MPH. The bike may also be used like a normal bike without any assistance from the motor.
Note: We cannot guarantee the performance of our couriers. If you receive a Zipper e-bike which was damaged in transit, please take a picture before assembly and send it to our email address email@example.com before use and we’ll send the replacement part.
Important Safety Information
Mechanical Parts Safety
Adjusting The Suspension
Brakes Instructions & Adjustment
Front Wheel Installation
Inflating The Tyres
Installing The Handlebars
Adjusting The Chain
Attaching The Pedals
Attaching The Mudguards
Adjusting & Operating The Gears
Specifications Specifications Specifications
Front And Rear Tyre Centre Distance（mm）
Rated Output Speed
Burst Discharge Current
AC110-240V 0.8A 50-60HZ
Charging Voltage And Current
Battery & PAS Range
Important Safety Information
The term “eBike” throughout this manual refers to your Electrically Power Assisted Cycle (EPAC).
As with all bicycles, a Zipper eBike must be used and maintained properly in order to function correctly. Please read this manual carefully before use as it contains vital safety information to ensure the continued performance of the bike and for safety reasons. Improper handling can pose danger to your safety and health. If you have any queries, please feel free to contact our customer service department.
Before Using Your Bike
- Please charge the battery and pump the tyres before usage!
- Please observe national laws and local travel regulations, violations of which are not the responsibility of Zipper Bikes.
- Our products are constantly being updated and changed therefore specifications may change slightly from those listed in this manual.
- Please operate your bike according to the instructions. Any damage, malfunction, loss or fault caused by misuse is not the responsibility of Zipper Bikes and will void the warranty.
- Unless permitted by Zipper Bikes or an approved distributor, you may not change the original configuration of the bike; doing so will void the warranty.
- An electric bike should only be used by children with adult supervision.
- Please do not touch the battery or battery cables and the metal of the bike at the same time, as this may cause a burst of discharge current which may cause harm or damage to the bike.
- Static starting, riding uphill or against the wind, operating over the maximum load and low tyre pressure will increase battery consumption and decrease the range. If you want to get the best range possible (1) Pedal more. (2) Reduce unnecessary braking and starting. (3) Avoid overloading. (4) Check the tyre pressure frequently.
- Leaving the battery empty for a long time may damage the lifetime of the battery. After riding please charge the battery, if you do not use the battery for a long time please charge the battery to the half saturation state for 36-39V, and take out the key. It is recommended that, you should use the bike at every 1-2 months.
- Please avoid excessive exposure of the e-bike to the sun and rain, such as leaving the bicycle outside. In order to avoid electroplating of the parts and paint corruption, please do not expose to high temperatures.
- Please check the braking performance regularly, and do not pour oil into the braking mechanism. Take extra caution when cycling in snow or minus temperatures, as braking distances will be greatly increased.
- Before using your bike please check the all parts, to ensure that everything is tight and intact, to avoid damage or injury.
- The lithium battery will not cause environmental pollution, but for the sake of safety, please do not throw away batteries, take your old battery to a battery recycling centre.
- Do not leave the battery near high temperatures, and when charging please keep clear of flammable items, if you remove the battery to charge it, please place it on a non flammable surface.
- Please pay special attention where you see the below safety sign, as these items may be hot or cause a shock.
- This e-bike can be exposed to light rain and snow, but cannot wade into water. Submerging the motor hub will cause the bike to stop and may cause damage.
- Please do not exceed the maximum load, for example carrying passengers or heavy objects.
- Before you ride this eBike in a busy area or on public roads, practice riding in a safe area free from hazards. Take time to learn the eBike’s controls and power.
- On the road, never undertake a vehicle as it may not see you, and turn left into your path. Please pay particular attention to busses and large vehicles, as it is difficult for raised cabins to see cyclists.
- Turn off the power using the key when stopped, to conserve power.
- Users should observe local road and traffic regulations for standard bicycles in force in the country of use at all times. It is your responsibility to identify and follow all local laws and regulations, including fitting your eBike with any additional equipment necessary to comply with local laws.
- Observe the applicable traffic regulations.
- At night your eBike MUST have a white front light lit. It MUST also be fitted with a red rear reflector, white front reflector and amber pedal reflectors which are both supplied.
- Never ride with no hands
- Do not wash your eBike with the battery charger connected to the battery whilst charging to prevent the possibility of electric shocks. Do not submerge the battery in water.
- When pushing the bike, remember to always turn off the power switch.
- All e-bikes should only be stored indoors.
- Do not tamper with the electrical control unit on your eBike. This could endanger the rider.
- Always wear a cycle helmet that confirms to current regulations for your safety to reduce the likelihood of head injuries.
- Always pull the brakes and hold the handlebar firm and straight before taking off in order to make sure you keep control of the bike when power assistance is in action. Note that power assistance is triggered off immediately as soon as your foot slightly presses on the pedal.
- This eBike is intended for use as a leisurely off road bicycle. Using the eBike for any other purpose may result in serious injury. If you intend to use your bike on the public roads then a white bike light must be fitted to the front of your bike.
- Adopt a speed that reflects the terrain as well as your riding ability.
- Use designated cycle paths when not using public roads.
- When riding your eBike, wear close-fitting trousers, or use a bicycle clip. Loose clothing can get between moving parts and cause injury.
- Wear bright and/or reflective clothing when cycling.
- Your eBike saddle should be as close as possible to horizontal. Do not tilt the saddle backwards, as this can lead to back pain and physical injury.
- Take care when loading your eBike into a car or when mounting it on a bicycle carrier.
- We DO NOT recommend that you use a bicycle trailer with your Zipper eBike.
- You can fit a standard fitment luggage carrier to your eBike.
- We DO NOT recommend that you use a child seat with your Zipper eBike.
- You must be over 14 to ride an eBike.
- The drive assist system is limited to a maximum continuous power rating of 0,25kW (250W) and a maximum speed of 25Km/h, (15.5 mph).
- Your eBike is designed for a maximum permitted overall weight (rider + luggage + bicycle) of 176kg. The permissible total weight of the rider plus luggage is 150kg.
- Do not submerge your eBike in water.
- Be aware that the speed at which you are travelling may be faster than you are used to, especially when accelerating.
- Loosen the throttle and use the brake only; apply the back brake first by pulling the left hand brake lever and then the front brake by pulling the right hand lever. If you need to brake urgently, please use both the front and back brake at the same time.
- Regularly check your brakes for signs of wear and tear. Any worn parts must be repaired or replaced immediately.
- Be careful while getting used to the brakes. Practice emergency stops in a place clear of traffic until you are comfortable controlling your eBike.
- Wet weather reduces your braking power and the grip of the brakes. Reduce your speed and be aware of longer stopping distances when cycling in wet conditions.
- Braking on unpaved surfaces will differ. Be sure to practice braking on different surface types.
- Ensure that braking surfaces and brake pads are free of wax, grease and oil.
- Do not pedal and brake at the same time as this will cause excessive wear.
- Do not use the charger in places of heat, excessive smoke and dust, moisture and direct sunlight.
- When charging, please keep the charger in a well ventilated room and on a flat surface.
- Do not allow any liquid near the charger and do not insert any metal items.
- Do not drop, impact or try to dismantle the charger.
- Do not attempt to repair a broken charger yourself, charger replacements are available to purchase.
- Do not leave a battery charging unattended, charging should be done while supervised and away from valuables, pets, children and flammable items.
- Unplug the charger when not in use.
- The charger should only be cleaned with a dry cloth. Never use a wet cloth, oil or any other liquid.
- Do not use an extension cable. An extension cable if not 100% compatible might catch fire or cause an electric shock.
- Before use, check the charger cord for signs of damage or ageing. A damaged or entangled charger cord increases the risk of fire and electric shock.
- Do not abuse the charger cord. Never carry the charger by the cord.
- Do not pull the cord to disconnect from a socket; grasp the plug and pull to disconnect.
- Don’t wrap the cord around the charger when storing.
- Keep the charger cord away from hot surfaces and sharp edges.
- Do not handle the charger with wet hands.
- The charger must be removed from the socket before removing the battery, cleaning or maintaining the appliance.
Your Zipper bike has a built in battery indicator on the handlebars, when the battery is full all five LEDs should light, and when the indicator shows only two LEDS lit then the battery needs to be charged. Sometimes the lights may flicker or turn off and on which is normal.
- This e-bike comes with a removable battery. The included keys are use to lock the battery in place. The 4-prong power cable has a screw cap to ensure that the power will not cut out unexpectedly.
- Only use the supplied charger and battery, and double check to make sure the output of your charger matches your battery. Any other battery is not compatible and risks exploding while charging causing serious injury to people as well as damage to other equipment. Using your charger to charge batteries not supplied by Zipper Bikes could risk catching fire, provoke electric shock and/or cause serious injury.
- When charging, connect the battery to the charger first and then plug the charger into the mains.
- When charging, the power indicator light is red to indicate the battery is still charging. When the battery is fully charged (3-6 hours), the charging indicator lights will change from red to blue or green, and the charger should be unplugged soon after. Charging time should generally never exceed 8 hours. IMPORTANT - NEVER LEAVE A BATTERY CHARGING OVERNIGHT UNATTENDED.
- After charging, you should pull the charger plug out of the mains and then disconnect the battery from the charger. If you only wish to partially charge the battery for storage charging time should be reduced accordingly.
- If you smell burning during the charging process of the battery or the charger gets very hot please immediately stop charging, and contact our customer service department or your local dealer for advice.
This eBike comes with a built-in battery, to ensure that the power will not cut out unexpectedly. Please read the following page on maintenance carefully.
- Please fully charge the battery before first use as described above.
- Please only use the supplied or designated chargers. Otherwise damage may occur to the battery and other related accessories, which could result in an accident. Any damage, loss or fault arising from incorrect charging procedure or from using the wrong charger will be borne by the purchaser.
- The battery can be charged while inside the bike. Some models can also be removed from the bike for charging. The battery will need using (cycled) around 8-10 times before it reaches optimum performance and capacity.
- Be careful that the metal ports at the end of the battery box or connecting leads do not touch any other metal as this can cause a short circuit, particular attention should be made with folding bikes.
- Do not drop, impact or try to dismantle the battery.
- Do not use the battery for long periods of time under sun exposure or hot temperatures. If you don’t use your electric bike for a long period of time, please charge it every two months, charging to half capacity is considered efficient.
- Ensure water does not enter the batteries charging port and that the battery is never exposed to humidity.
- When discarding unwanted batteries, first discharge the battery to zero voltage. Never put into a fire!
- This bike includes Li-Ion batteries. Keep away from children, liquid, heat or fire. Do not incinerate.
- When you dispose of the appliance remove the battery and dispose of the battery safely in accordance with local regulations.
- You must always use the battery in accordance with the instructions on the battery label.
- Liquid ejected from the battery may cause irritation or burns.
- Leaks from the battery cells can occur under extreme conditions. Do not touch any liquid that leaks from the battery. If the liquid gets on the skin wash immediately with soap and water. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery and dispose of immediately in accordance with local regulations.
Mechanical Parts Safety
- Fastening components:
1.1. The handlebar, head tube and saddle tube must be locked with 18Nm torque.
1.2. Locking force of 15-17 KGF is required on quick disassembly parts.
1.3. The front wheel nut locking torque needs to reach 18Nm, and the rear needs to reach 30Nm.
- Lubrication: The chain, flywheel and headsets need regular maintenance. Drop a little oil onto the chain, and apply drops every month.
- Adjust the rear ends of the chain. Loosen the nut, adjust the rear wheels front and rear position as needed to achieve the chains proper tightness, the middle position of the chain if pushed down with your finger should only drop 10-15mm.
- Pay attention to the front and rear brake blocks, if worn they should be promptly replaced, to avoid loss of braking and wearing the aluminium ring.
Adjusting The Suspension
The dial on the left is to adjust the suspension pressure, while the dial on the right is to lock the suspension.
Assembling Your E-Bike
Adjusting The Front Braking System
The right brake lever activates your front brakes. Check the right hand braking handle as shown below, there should be full front brake pressure when the lever is pressed halfway. If the clearance spacing is different on the left and right pads, you can adjust the adjusting screws on each brake arm until the distance of the two clearances are the same. Loosen the spring tension adjusting screw, then tighten or loosen the brake cable to make the clearances between the brake pad and the wheel rim to be approximately 1.5-2mm. Tighten the tension screw when the clearances of the right-hand-side and left-hand-side pads are equal.
Adjusting The Rear Braking System
The left brake lever activates your rear brakes. Check the left brake lever the same way as checking the right brake lever but on the rear brake, adjusting the adjustment screw as needed. If this does not work, loosen the nut of the brake cable anchor bolt, then loosen or tighten the cable until the proper tension is reached. If this still does not work, you can adjust the clearance fine adjustment screw, and keep the clearance of the internal brake pad the same. Adjust these parts until the rear brake works correctly.
When emergency braking, your weight will shift forwards, reducing the load on your rear wheel. This can cause your rear wheel to slip, which is dangerous, especially when riding downhill. When emergency braking, keep your weight back and as far down as possible. Brake smoothly and remember your front brake will take more load when braking harder.
Installing The Front Wheel
First take the quick release axle, remove the screw cap and spring, and insert the axel into the wheel hub. Return the screw cap and spring, and then rest the front fork on the hub axle. Tighten quick release axle and firmly clamp it in place. If you replace the wheels, please tighten the nuts according to the recommended torque; the rear wheel torque should be no less than 30Nm while the front wheel torque should be no less than 18Nm.
Inflating The Tyres
- Remove the valve cap.
- Briefly press down on the valve to make sure the valve doesn’t stick and to remove any loose dirt.
- Press the pump nozzle onto the tyre valve stem as far as it will go.
- Lift the thumb lock lever into the locked position.
- Pull out the end of the bicycle pump and push down to start inflating the tyre, continue to do this until you have reached the desired tyre pressure. Do not inflate beyond the maximum tyre pressure – printed on the sidewall of the tyre.
- Release the thumb lock by pushing the lever back down.
- Remove pump nozzle from the valve stem.
- Replace the dust cap.
Installing the Handlebars
First remove the handlebar locking screw and cover, mount handlebar clamp unto the stem tube, then stand in front of the e-bike and keep the front wheel between your legs, hold the handle bar with both hands tightly, and then adjust the handle bar angle preferably so that the handles are at a right-angle with the handlebar tube, the height of the handlebars should be adjusted to your personal size and preference. Please do not extend the handlebar height over the maximum limit warning line or you may cause injury. Once the angle and height are correct be sure to correctly tighten the handlebar locking screw and cover at the top of the stem, and then firmly tighten the handlebar clamp.
Installing the Seat/Saddle
Insert the seat post and adjust the seat height as follows:
- Sit on the bike saddle.
- Try to reach the pedal with your heel when it is in the bottom position. Your knee should be more or less fully straight.
- Place the balls of your feet on the centre of the pedal. If your knee is now slightly bent, the saddle height is correct.
- Never adjust the saddle so the minimum mark (marked on the seat post) is above the top of the seat tube, otherwise you could injure yourself or damage the seat post! Firmly tighten the seat post clamp with the quick release lock so that it lies flat against the frame.
- Check that the saddle cannot move once the quick-release is closed. If it does move, tighten the adjusting nut, until you need to use the palm of your hand to close the quick-release lever. CAUTION – Be careful not to trap your fingers when locking the quick release mechanism.
Adjusting The Chain
Release the rear hub nut and adjust the position of the hub to adjust the chain tension (the chain slack should be 10~15mm), align the chain wheel with the rear sprocket so that they are in the same straight line, and then tighten the rear hub nut. Rotate the crank set counter-clockwise, the chain should have the appropriate tension and run smoothly. CAUTION – Keep loose clothing away from the chain when riding as it may become tangled and cause injury.
Installing The Pedals
Normally the pedals are marked with an “L” for left or an “R” for right, if they are not marked then they can be used on either side. Please install accordingly, otherwise the crank arm can be damaged.
Installing The Mudguards
The long mudguard bots onto the rear fork arch, and the short mudguard screws into the front fork arch, please use the washers provided when tightening the bolts.
Adjusting & Operating The Gears
Your eBike comes fitted with a Shimano gearbox. Please see the included Shimano manual for adjustment and operation instructions.
If you intend to use your bike on the public roads a standard white bike light must be fitted to the front of your bike and turned on when riding in the dark.
Clean using a soft bristled brush to remove dirt and then washing with warm water. Do not apply water directly to rear drum brake, motor and hubs to avoid performance drop or shortening of life expectancy. Do not use steam, a hose pipe or high-pressure water gun to clean. Do not wash your eBike with the battery charger connected to the battery whilst charging to prevent the possibility of electric shocks. Do not submerge the battery in water or use to much water near the battery. After cleaning, dry your bike using a soft cloth.
As with all mechanical components, the bicycle is subjected to wear and high stresses. Different materials and components may react to wear and tear or stress fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail, possibly causing injuries to the rider. Any form of crack, scratches, or change of colouring in highly stressed areas indicate that the life of the component has been reached and it should be replaced.
For composite components, impact damage may be invisible to the user, the manufacturer shall explain the consequences of impact damage and that in the event of an impact, composite components should either be returned to the manufacturer for inspection or destroyed and replaced.
- After an accident or crash you must take your eBike to a bike repair specialist to make sure that it is safe to ride. Be aware that damage may not be visible. Failure to do this may result in serious injury.
- Any form of crack, scratches or change of colouring in highly stressed areas indicate that the life expectancy of the part has been reached and it should be replaced immediately.
- Ensure the battery is removed from the bike before carrying out any maintenance.
- Make sure that all screws and bolts are tightened securely and to the prescribed tightening torques before riding.
- You must always use genuine replacement parts when performing maintenance on your eBike.
- Regularly check the tyre pressures (minimum 50psi, maximum 75psi) and regularly check the tread depth of tyres.
- Regularly check the brakes for wear and adjust or replace them if needed.
- Check the wheels for buckles or damaged spokes and have them repaired immediately by a qualified bike repair specialist.
- Regularly check your light to ensure the LEDs are working and replace if needed.
- Check your wheels rims for wear. Each time the brake pads come into contact with the rim’s braking surface, a little rim material is abraded away. After a while, the rim will have a concave channel cut into it from the brake pads. When rims get this worn, i.e., this far past their intended life, there is very little structural material remaining to hold the rim together. This could be very dangerous as the wheel could crack while in use causing serious injury. Visually inspect your braking surfaces for excess wear. Usually this manifests itself as a concave profile on the rim. The easiest way to see this is by placing a straight edge (e.g. a metal ruler) across the rim surface. You'll see a significant area of daylight between the rim and the ruler if wear is excessive. Also look for grooving running around the rim, often caused by grit lodged in the brake blocks. These grooves can be the first places that the rim can fail. If the rims show signs of rim wear they must be replaced.
1.1 Before each ride, check whether tyre pressure is appropriate. Normally, the pressure is 125KPa for front wheel and 175KPa for the rear wheel.
1.2 Any cracking or abnormal wear on the tyres or rims.
1.3 Any nails, stones or glass stuck inside the tyres.
2. Brakes work normally?
3. Any damage on the charger and power cable?
4. Front and rear hub nut tightened? Throttle and turning mechanism parts loose or worn?
5. Brake pads worn?
6. For folding E-Bikes, check locking mechanism is secured.
7. Chain drive mechanism.
8. Crank arm worn out? Smooth rotation?
9. Wheel spokes loose or broken?
= Check = Adjust/Replace = Lubricating
Replacement parts for worn components such as tyres, tubes and brake friction parts are available from www.Scootercity.co.uk. For safety it is important to use only genuine replacement parts for safety-critical components.
No power after turning the power key including no lights etc
Electric lock is damaged
Replace multifunction throttle
Line conductor is broken
Repair or replace line
Check battery with voltmeter and ensure battery is charged. If no power from battery replace.
No motor power after turning the key but lights etc are still working.
Battery under voltage protection level
Charge the battery
Throttle is broken/line conductor is abnormal
Replace throttle / repair line conductor
Right and left brake is broken
Replace right and left brake
Controller and motor is broken or line conductor is abnormal
Replace controller and motor, maintain the line conductor
Range is low
Battery voltage is too low/not charged enough.
Charge the battery fully until charger lights turn blue or green. If still a problem battery has been charged incorrectly and needs replacing.
Tyre pressure is not enough
Blow up the tyres
When braking, uninterrupted power
Replace the brake, maintain the line conductor
Mechanical parts turn badly and
Maintain the bad parts, replace the fault worn parts
More uphill, drive against wind, frequent braking, overloading
Correct bad drive mode, read our best driving practices guide.
Battery is too old and broken
Replace with the same model battery
Power indicator light displays normal but when driven with assistance the motor supplies no power
Pedal position the PAS assistance is off normal
Adjust the PAS assistance, have no deviation and loosening phenomenon
Charging the battery shows abnormal, the charger’s indicator light is flashing, and the battery can’t be charged
Charger into state of burst discharge
Check battery charge loop if it has short circuit phenomenon
Charger is broken
Replace with a new model charger that is the same
Charger is not connected, socket is damaged
Reconnect the charger with new socket