Estimated Arrival: Between Apr 17 and Apr 25. UK
Shipping & Returns: Free Shipping & Returns
ZIPPER M6 ELECTRIC SCOOTER WITH SEAT, CARGO BAG, SUSPENSION & KEY
The Zipper M6 electric scooter cargo version is not only great fun but also a practical work horse. The 350W brushless motor gives plenty of power and speed giving a top speed of up to 25 km/h and a range of up to 25 km depending on load and terrain. This version has been upgraded with rear suspension to give a softer ride, a large cargo bag that is great for delivery drivers or practical storage, and a key start for security.
Other standard features include a spring loaded comfy seat, a digital power display, vented disc brakes, LED lights and bigger 12 inch tyres for a safer and comfier ride with more ground clearance.
The M6 has many features not found on standard scooters. The lithium battery has been upgraded to a bigger 8Ah to give an increased range of up to 25KM per charge. For safety it has both front and rear vented disc brakes, LED lights and bigger 12 inch tyres. These bigger tyres not only give a comfier ride but are also safer as they can handle holes and obstacles better. The frame is made from high tension steel so it's super strong and can carry up to 120kg. The front handlebars can be folded down and the seat removed for storage or if you wanted to fit it in your car. The rear suspension system combined with the spring loaded big seat and large tyres makes this a comfy scooter for every day use.
VENTED DISC BRAKES & BIG 12" TYRES
The vented disc brakes give extra stopping power while the big tyres give a smoother and safer ride.
This upgraded version of the M6 has rear suspension for added comfort.
INCLUDED CARGO BAG
A smart cargo bag is included, great for deliveries and storage. Bag dimensions are 30cm x 20cm x 18cm.
KEY AND POWER INDICATOR
The scooter can not be used without the key.
LARGE SPRING LOADED SEAT
The big seat is comfortable with springs underneath for a soft ride.
LARGE GROUND CLEARANCE
Big 23cm ground clearance to deal with any pot holes or curbs to ensure a safer drive.
SKU VHEM6-LARGEBASKET Manufacturer Zipper Scooters Engine / Motor Size 350W Deck Material Steel Fuel Type Electric Fuel Consumption No Fuel Tank Capacity No Max. Range 25 KM (dependant on weight and surface) Battery 8AH / 36V Charge Time 6-8 Hours Max. Speed 25 KM/h (dependant on the weight and terrain) Max. Power (Kw/Rpm) No Max. Torque (N.M/Rpm) No Front Brakes Vented Disc Rear Brakes Vented Disc Front Suspension No Rear Suspension Yes Front Tyres 12" Rear Tyres 12" Starting System Electric Ignition No Transmission Chain drive automatic Wheel Base 130cm Seat Height Adjustable, Removable Ground Clearance 23cm Net Weight 23 Kg Engine Type Electric brushless motor 350W Engine Bore x Stroke No Compression Ration No Drive Train Chain driven Recommended Age 12+ Licence Requirements Not for use on public highway. Packing Info Minor Assembly Required. Free Tools Included. Extra Info. Includes mains charger. Bag dimensions are 30cm x 20cm x 18cm.
UK - Free delivery 3-7 days
Assembly: Minor Assembly Required. Free Tools Included.
Please note that this product requires very basic assembly which takes around 10 minutes.
Warranty: This product is supplied warranty
- Appearance size and Material
The outer shell of the product is ABS and the transparent window is imported high hardness acrylic, the hardness value is equivalent to tempered glass.
Side view Shifter support
- Working voltage and Connection mode
2.1 Working voltage：DC24V、36V、48V、60V Compatibility；
Other voltages can be customized.
2.2 Connection mode：
Wiring sequence of standard connectors
Connect to the controller Instrument outlet part docking part
Chart: List of wiring sequence of standard connectors
Wiring sequence of standard connectors
Instrument power cord
The power line of the controller
Instrument ground wire
The data receiving line of the instrument
The data sending line of the instrument
Note: the leads of some products are waterproof connectors. Users cannot see the color of the leads in the wire harness.
- Functional specification
3.1 Display function
Speed display, power indicator, fault prompt, total mileage, single mileage.
3.2 Control and Setting function
Power switch control, wheel diameter setting, Idle automatic sleep time setting, backlight brightness setting, starting mode setting, driving mode setting, voltage level setting, controller current limit value setting.
3.3 Communication protocol：UART
All contents of the Display screen（Full display within 1S after boot）.
Introduction to Display content
3.3.1 Voltage state level POWER
3.3.2 Multifunctional display area
ODO（Unit：mile、km）、TRIP、current voltage VOL、run time TM、fault codes ERR
Fault Codes (Decimal)
Low battery voltage
Communication reception fault
Communication send fault
3.3.3 Speed display area
Unit: mph, km/h
The speed signal is taken from the motor inner hall signal and sent to the instrument by the controller,（The time of a single Hall period, Unit： 1MS） The instrument calculates the true speed from the wheel diameter and signal data (The motor hall also needs to set the number of magnetic steels).
Current speed; Max speed; Average speed.
3.3.4 Vehicle power gear adjustment, It is adjustable in 1-3 gears.
3.3.5 Zero, Non-zero start display area；
shows Zero start, shows Non-zero start；
P01: Backlight intensity , the darkest is level 1，the brightest is level 3;
P02: Mileage unit，0: km; 1: mile;
P03: Voltage classes：24V，36V，48V，default: 36V；
P04: Sleep time: 0, don’t sleep; other figures are sleep time; Range：1-60; Unit: minute;
P05: Power gear: 0: 3gears mode;
P06: The wheel diameter: unit: inch; precision: 0.1;
P07: Speed measurement of magnetic steel number: Range: 1-255;
P08: The speed limit: Range 0-100km/h，100 means no speed limit;
1.Communicate status（Controller control）: The input data here represents the maximum running speed of the vehicle: For example, enter 25, means the maximum running speed of the vehicle will not exceed 25km/h; the drive speed is maintained at the set value;
Error：±1km/h；（Power, Shifter all limit speed）
Note：the value here is based on kilometers. When the unit set is convert from kilometers to miles, the speed value of the display interface will automatically convert to the correct value of miles. However, the speed limit value data set in this menu under the mile interface is not converted, which is inconsistent with the actual speed limit value displayed;
Notice：P09-P15 menu is valid only in the communication state.
P09: Zero start、Non-zero start setting, 0: Zero start; 1: Non-zero start；
P10: Drive mode setting: 0: Power drive (How much power is output is determined by the power tap, and shifter is invalid at this time).
1: Electric drive (through the shifter drive, power gear is invalid at this time).
2: Power drive and electric drive coexist (power gear and shifter drive both work).
P11: Power sensitivity setting 1-24;
P12: Power start intensity setting 0-5;
P13: Power magnetic steel disk type setting 5，8，12grain magnetic steel type;
P14: Set the current limit of the controller, default: 12A , range: 1-20A;
P15: Controller under-voltage value;
P16: ODO Reset , long press the button to clear ODO for 5 seconds；
P17: 0: Cannot make a cruise, 1: Can make a cruise; Automatic cruise optional (valid for Protocol 2 only)
P18: Display speed proportional adjustment Range: 50%~150%;
P19: Gear 0, 0: containing 0 gear, 1: not containing 0 gear;
P20: 0: Protocol 2; 1: Protocol 5S; 2: standby 3: standby
- Button introduction：
5.1 When it is power-off state, long pressbutton to start; after start, short pressbutton, interface will switch in ODO、TRIP、VOL、TM、ERR.
5.2 When it is power-on state, long pressbutton to close, and short pressbutton to adjust the power gear.
5.3 Long press+button enter into mode setting. In the setting interface, short pressbutton to switch parameter, long pressbutton to switchbutton’s function of add/subtract;
Parameter modification：In some parameter state，short pressbutton to switch parameter, short pressbutton to add or subtract value. After modification，short pressbutton to switch to the next parameter, and save the previous parameter value; after parameter modification, long press+button again to exit setting interface or wait 8 seconds to automatically exit and save the parameters.
5.4 Crank adjusts the motor speed, and the motor speed increases by turning from top to bottom; and let it go then return to zero.